Calibration of water flow meter | Calibration of water electromagnetic flowmeter

『Calibration of water flow meter』Related information(flow rotameter|digital flow meter|balo meter|hydraulic flow meter|volumetric meter|positive displacement meter|pitot tube flow meter|displacement meter|cfm meter|variable area flow meter|inline flow meter|differential pressure flow meter|calibrated flow meter|velocity meter|paddle wheel flow meter|oval gear flow meter|anemometer hvac|multiphase flow meter|doppler flow meter|thorpe tube flowmeter|heat flow meter)

1. Pipeline flowmeter

2. How to use ultrasonic flowmeter to measure water flow

When using ultrasonic flowmeter to measure water flow, it is necessary to choose the appropriate equipment type based on pipeline conditions, water body characteristics, accuracy requirements, and cost budget, and follow standardized operation and maintenance procedures. Specific operation process:

1. Choose the appropriate type of ultrasonic flowmeter. According to the application scenario requirements, ultrasonic flowmeters are mainly divided into three types: insertion type, pipe section type, and external clamp type. Their characteristics and applicable scenarios are as follows: Insertion type ultrasonic flowmeter advantages: high cost-effectiveness, installation does not require cutting off the pipeline, only the sensor needs to be inserted into the pipeline through a hole, suitable for large diameter pipelines (such as urban water supply main pipelines, with a diameter of 1 meter or more) or existing pipeline systems that require new flow measurement functions. Applicable scenarios: Industrial auxiliary pipeline monitoring scenarios with low requirements for flow accuracy. Attention: Accuracy is greatly affected by installation quality. It is necessary to ensure that the insertion depth of the sensor meets the requirements of the pipeline diameter and avoid areas such as pipeline bends and valves that are prone to vortex generation. Advantages of pipe section ultrasonic flowmeter: high accuracy, strong stability, simple internal structure, not easily blocked or interfered by impurities, suitable for long-term stable measurement. Applicable scenarios: Accurate measurement of water flow rate is required in chemical

and pharmaceutical production (such as raw material ratio, cooling medium flow control), or measurement of clean water bodies such as purified water and high-purity chemical water. Attention: Installation requires water and pipe interruption, and the larger the diameter, the higher the cost. It needs to be planned and installed synchronously during the design phase of the new pipeline system. Advantages of external clamp ultrasonic flowmeter: non-contact measurement, easy installation, low cost, sensor clamped on the outer wall of the pipeline, avoiding direct contact with the water body. Applicable scenarios: measuring corrosive, toxic, or high-temperature water bodies; Temporary measurement of temporary water supply and drainage pipelines on the construction site; The scene of Wangmaze needing to protect pipelines in ancient buildings and historical relics. Attention: The stability and accuracy are relatively poor. Before use, clean the outer wall of the pipeline and choose a measurement position with uniform material and smooth inner wall.

2. Installation and commissioning follow the principle of straight pipe section. Sensors should be installed in the straight pipe section of the pipeline. The length of the upstream straight pipe section should be more than 10 times the diameter of the pipeline, and the downstream should be more than 5 times.

. If the length of the straight pipe section is insufficient, a rectifier can be installed to improve the water flow state and reduce the impact of disturbance on accuracy. The installation location should avoid areas such as pipe bends, valves, and reducers that are prone to vortex formation to ensure stable water flow. For the external clamp type, it is necessary t

Calibration of water flow meter | Calibration of water electromagnetic flowmeter

1. Pipeline flowmeter

2. How to use ultrasonic flowmeter to measure water flow

『SILVER Official Website SERVICE』