Current position > Product detail
『200 on Peak Flow Meter: Discussion of Personal Targets with Medical Professionals』Related information(flow rotameter|digital flow meter|balo meter|hydraulic flow meter|volumetric meter|positive displacement meter|pitot tube flow meter|displacement meter|cfm meter|variable area flow meter|inline flow meter|differential pressure flow meter|calibrated flow meter|velocity meter|paddle wheel flow meter|oval gear flow meter|anemometer hvac|multiphase flow meter|doppler flow meter|thorpe tube flowmeter|heat flow meter)
200 on Peak Flow Meter: Discussion of Personal Targets with Medical Professionals
Quick Answer: A reading of 200 on a clinical peak flow meter is a medical value, not an industrial flow reading. Silver Automation Instruments does not make medical peak flow meters. For industrial systems, a target such as 200 L/min, 200 kg/h, or 200 m3/h is a different discussion. You need to send us the fluid name, flow range, pressure, temperature, pipe size, and installation location.
Here is the thing. The term peak flow meter belongs to respiratory care. It is not an industrial instrument. A 200 reading means nothing for a process line unless the units are clear. This topic sometimes appears in industrial search queries because buyers see the number 200 and think in process units.
We cannot interpret a medical peak flow reading of 200 for you. A doctor or respiratory specialist must set a personal target based on age, height, and medical history. Silver Automation Instruments works with industrial end users and distributors. We do not sell handheld clinical peak flow meters.
Why This Keyword Matters for Industrial Buyers
Most engineers skip the medical part. They see 200 and think in m3/h, kg/h, or L/min. A reading of 200 m3/h in a wastewater plant is not the same as 200 L/min in a diesel transfer line. Because flow measurement depends on the fluid and the process, you cannot swap a medical device for an industrial instrument.
Silver Automation Instruments supplies industrial flow meters for oil and gas, water and wastewater, chemical, food and beverage, and marine sectors. We sell electromagnetic flow meters, Coriolis mass flow meters, ultrasonic flow meters, vortex flow meters, oval gear flow meters, thermal mass flow meters, pressure transmitters, and paperless recorders.
What a Target Discussion Should Cover
When a customer asks for a flow meter, we do not start with price. We start with the operating conditions. In practice, the conversation covers these points:
Fluid name and phase. Water, diesel, palm oil, natural gas, steam, or brine. Flow range. Minimum, normal, and maximum in kg/h, L/min, or m3/h. Pressure and temperature. Example: 12 bar and 90 °C. Pipe size. DN15, DN50, DN80, or DN100. Fluid properties. Viscosity in cP, conductivity in µS/cm, and density if known. Hazardous area. For example ATEX Zone 1 or Zone 2.
This is not a consumer conversation. A 200 m3/h target in a desalination plant in the Middle East needs a full bore electromagnetic flow meter or a sea water flow meter for desalination plant duty. A 200 kg/h target for liquid additive in a food plant may need a Coriolis mass flow meter. A 200 L/min target for diesel in a depot in Vietnam may need an oval gear flow meter.
Specific Example: 200 L/min Diesel Transfer
Last year a customer in Vietnam asked us about a diesel flow meter for a transfer skid. The target was 200 L/min. The pipe size was DN40. The pump pressure was 8 bar. The viscosity was about 4 cP at ambient temperature. We recommended an oval gear flow meter with a local totalizer and a 4-20 mA HART output. The unit was installed next to the pump. It
Specific Example: 200 m3/h Wastewater Line
A water utility in the Philippines needed a flow meter for a treated wastewater discharge line. The target was 200 m3/h. The pipe was DN150. The flow profile was partially full at low flow. We supplied a full bore electromagnetic flow meter with PTFE liner and stainless steel electrodes. The signal output was 4-20 mA HART connected to a paperless recorder. The installation used a straight run of 5D upstream and 3D downstream.
Recommended Industrial Models
For conductive liquids above 20 µS/cm, choose an electromagnetic flow meter. Common sizes range from DN15 to DN600. For diesel, fuel oil, or high viscosity fluids from 1 cP to 1000 cP, an oval gear flow meter works well. For gas flow or steam, choose a vortex flow meter or thermal mass flow meter. For high accuracy mass flow, a Coriolis mass flow meter is the right choice. For non contact measurement on large pipes or open channels, use an ultrasonic flow meter.
We often supply pressure transmitters alongside the flow meter. Many customers need a PT100 temperature sensor for temperature compensation. The signal can go to a paperless recorder or a PLC. The loop is usually 4-20 mA HART.
How to Send Us a Quote Request
Do not send a vague message like contact us for a flow meter. That delays the quote. Send us your pressure in bar, temperature in °C, pipe size in DN, and flow range. Include the fluid name. If possible, give viscosity in cP and conductivity in µS/cm. Tell us the installation country and whether the area is hazardous. That is enough for us to recommend one or two models.
For quotes and technical selection, contact Silver Automation Instruments. Tel: +86 25 68650347. Whatsapp: +86 25 52155837. WeChat: +86 13512131526. You can also browse the product pages at flow-meter.com.au.
FAQ
Is 200 on a peak flow meter related to industrial flow meters? No. A clinical peak flow meter measures exhaled air in liters per minute for a person. Industrial flow meters measure process fluids in m3/h, kg/h, or L/min. Silver Automation Instruments does not supply medical peak flow meters.
What does a 200 reading mean for my process? It depends on the fluid and the flow range. 200 m3/h is common for municipal water lines. 200 L/min is common for fuel transfer. 200 kg/h can be a dosing line. Send us the fluid name and operating data for a specific recommendation.
Which flow meter type should I choose for 200 L/min of diesel? Usually an oval gear flow meter or a Coriolis mass flow meter. Oval gear is more economical for clean diesel. Coriolis gives mass flow and density but costs more.
Can you supply flow meters for ATEX Zone 1? Yes. We can supply vortex, Coriolis, and thermal mass flow meters with ATEX or IECEx approvals for Zone 1 and Zone 2. Tell us the gas group and temperature class in your specification.
What information do you need for a price quote? Fluid name, flow range, pressure in bar, temperature in °C, pipe size in DN, viscosity in cP or conductivity in µS/cm if known, and installation country. This data helps us quote the right flow meter quickly.